Select Store

Contact us

Welcome to E.Roko !

TITEBOND - WHITE GLUE

TITEBOND - WHITE GLUE

More Views

TITEBOND - WHITE GLUE
Titebond White Glue is an exceptionally strong, economical white glue that sets faster than most other comparable glues. Its versatile formula is ideal for general woodworking applications, as well as many other porous and semi-porous materials.
Description

Details

Product Features

  • Fast set - Strong bond
  • Safe - no solvent vapors
  • Water cleanup & non-toxic
  • Versatile
  • Dries clear and colorless
  • Sets faster than most other white glues

Physical Properties

Calculated VOC 10.7 g/L State Liquid
Weight/gallon 9.1 lbs Color White
Chalk temperature Approximately 50°F. Dried Film Translucent
Flashpoint > 200°F. Solids 45%
Freeze/thaw stability Stable Viscosity 5,600 cps
pH 4.7 Storage life 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 3,550 psi 50%
  150°F. Overnight 1,600 psi 15%

Application Guidelines

Application Temperature Above 50°F.

Open assembly time 5 minutes (70°F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread 7 mils (typical)

Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.


Limitations

Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.


Additional Information

Additional Information

Brand Titebond
Supplier Code N/A
Product Features N/A
Reviews