- Bonds melamine, vinyl coated products, and HPL to porous materials
- Thicker formulation - fewer runs and drips
- Fast setting - Excellent strength
- Dries clear
- Long open time
- Fast initial tack
Type Specialized vinyl acetate emulsion Calculated VOC 3.0 g/L State Liquid Weight/gallon 8.6 lbs . Color White Chalk temperature * Approximately 40 °F. Dried Film Clear Flashpoint > 200 °F. Solids 57% Freeze/thaw stability Unstable Viscosity 12,000 cps pH 4.0 Storage life 24 months in tightly closed containers at 75 °F.
Bond Strength ASTM D-905 (On Hard Maple)
Substrates Strength Substrate Failure Melamine/Melamine Lap Shears 329 psi 100% Melamine/particle Board 339 psi 100%
Application Temperature Above 40 °F.
Open assembly time 5 minutes (70 °F./50%RH)
Total assembly time 10-15 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
LimitationsTitebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.
Caution StatementsCAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
- Additional Information
Brand Titebond Supplier Code N/A Product Features No