Select Store

Contact us

Welcome to E.Roko !

TITEBOND III - ULTIMATE WOOD GLUE

TITEBOND III - ULTIMATE WOOD GLUE

More Views

TITEBOND III - ULTIMATE WOOD GLUE
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.
Description

Details

Product Features

  • Passes ANSI/HPVA Type I water-resistance
  • Waterproof formula that cleans up with water
  • Superior strength - Strong initial tack
  • Designed for interior and exterior applications
  • Longer open assembly time
  • Lower application temperature
  • Unaffected by finishes
  • FDA approved for indirect food contact

Physical Properties

Type Advanced Proprietary Polymer Calculated VOC 5.6 g/L
State Liquid Weight/gallon 9.22 lbs
Color Tan Chalk temperature * Approximately 45°F
Dried Film Light brown Flashpoint > 200°F.
Solids 52% Freeze/thaw stability Stable
Viscosity 4,200 cps pH 2.5
Storage life 24 months in tightly closed containers below 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)
  Temperature Strength Wood Failure
  Room Temperature 4,000 psi 57%
  150°F Overnight 800 psi 0%

Application Guidelines

Application Temperature Above 47°F.

Open assembly time 10 minutes (70°F./50%RH)

Total assembly time 20-25minutes (70°F./50%RH)

Minimum required spread Approximately 6 mils or 250 square feet per gallon

Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.


Limitations

Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.


Caution Statements

No caution information is needed. Please refer to the Material Safety Data Sheet for further information.


Additional Information

Additional Information

Brand Titebond
Supplier Code N/A
Product Features No
Reviews