- First one-part wood glue to pass ANSI Type II water-resistance
- Designed for exterior use
- Excellent sandability
- Unaffected by finishes
- FDA approved for indirect food contact
- Ideal for radio frequency (R-F) and hot press gluing systems
- Easy cleanup with water
Type Cross-linking polyvinyl acetate Calculated VOC 5.5 g/L State Liquid Weight/gallon 9.1 lbs. Color Honey cream Chalk temperature * Approximately 55°F. Dried Film Translucent, yellow Solids 48% Freeze/thaw stability Stable Flashpoint > 200°F. Viscosity 4,000 cps pH 3.0 Storage life 24 months in tightly closed containers at 75°F.
Bond Strength ASTM D-905 (On Hard Maple)
Temperature Strength Wood Failure Room Temperature 3,750 psi 72% 150°F. Overnight 1,750 psi 6%
Application Temperature Above 55°F.
Open assembly time 5 minutes (70°F./50%RH)
Total assembly time 10-15 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
LimitationsTitebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution StatementsCAUTION: EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
- Additional Information
Brand Titebond Supplier Code N/A Product Features No