- Passes ANSI Type II water-resistance
- Designed for interior and exterior applications
- Excellent sandability
- Unaffected by finishes
- Ideal for radio frequency (R-F) gluing systems
- Easy cleanup with water
Type: Cross-linking polyvinyl acetate
Calculated VOC: 5.5 g/L
State : Liquid
Weight/gallon : 9.1 lbs.
Color : Light brown
Chalk temperature: * Approximately 55°F.
Dried Film: Brown
Flashpoint : > 200°F.
Solids : 48%
Freeze/thaw stability : Stable
Viscosity : 4,000 cps
pH : 3.0
Storage life : 24 months in tightly closed containers at 75°F.
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
BOND STRENGTH ASTM D-905 (ON HARD MAPLE)
Temperature Strength Wood Failure Room Temperature 3,600 psi 77% 150°F. Overnight 1,600 psi 10%
Application Temperature : Above 55°F.
Open Assembly Time : 5 minutes (70°F./50%RH)
Total assembly time : 10-15 minutes (70°F./50%RH)
Minimum required spread : Approximately 6 mils or 250 square feet per gallon
Required clamping pressure : Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application : Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup : Damp cloth while glue is wet. Scrape off and sand dried excess.
LimitationsTitebond II Dark Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, . Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM
- Additional Information
Brand Titebond Supplier Code N/A Product Features No